58 LIMITED WARRANTY
Not Covered by this Limited Warranty
Problem
• Cooktop enamel
chipping off
• Burners do not light
• Uneven flame
• Burner cap color
changes and
becomes dull
Cause
Improper usage
Clogged or dirty burner ports or electrodes will
not allow the burner to operate properly
OK
1. Improper burner cap installation
Burner cap is
Burner cap is NOT
properly seated.
2. Burner ports clogged by food residue
Ports blocked by dirt
* Oval burner
To clean: Release 6 nuts
Clean outside edges with
1. Scratching
2. Use of detergent or abrasive cleansers
Shine is lost
• Do not hit enamel cooktop
• Check and clean the gas
electrode.
Must be cleaned
Not working
• Check installation of burner
head and cap
properly seated.
• Hardened residue should be
removed using a toothbrush.
Flames uneven
• Oval burner
1) Release 6 nuts
toothbrush
2) Clean residue using
toothbrush
• Do not use steel wool or
abrasive cleansers to clean.
• To remove burnt-on food,
soak the burner heads in hot
water for 20–30 minutes. (Do
not use detergent)
Prevention