Steamfast SF-540 Guia Del Usuario página 8

CONNECTING HANGER
1. Locate vertical arm on top of Hanger. Locate the side with
a raised rim.
2. Align Hanger arm with Pole Top Hanger Hook. Slot raised
rim around top of Hanger Hook.
3. Press downward gently to lock Hanger onto Hanger Hook
(FIGURE 5).
CONNECTING GARMENT CLIP
NOTE: Telescopic Pole should be extended to maximum height (see Page 7 for details).
1. Align Garment Clip with Telescopic Pole. Which section of the pole you choose will depend on
the length of the garment you are steaming.
2. Pinch middle clasp of Garment Clip open.
3. Place open clasp around Telescopic Pole.
4. Release clasp to close it around Telescopic Pole.
CONNECTING FABRIC BRUSH
1. Make sure Lighted On/Off Switch is set to "OFF" position, and that unit is not emitting any steam.
CAUTION: Do not try to connect Fabric Brush while unit is emitting steam, as this can
cause burns and injury.
2. Align long peg on back of Fabric Brush with corresponding slot on face of Steam Nozzle.
3. Press Fabric Brush firmly onto Steam Nozzle, until it fits snugly and firmly in place.
CONNECTING CREASE TOOL
1. Locate hinged adapter on Crease Tool; note open slot on top (FIGURE 6-A).
2. Position Crease Tool so that slot on top of hinged adapter aligns with tab on bottom of Steam Nozzle.
3. Press Crease Tool firmly onto Steam Nozzle, ensuring tab fits into slot (FIGURE 6-B).
6-A
8 | ENGLISH
Assembling Your
Deluxe Fabric Steamer
FIGURE 6
FIGURE 5
6-B