Turn The Power Switch On; How To Control Your Model - Carson Nitrobone RTR 103014 Instrucciones

e. Turn the power switch on
Pull the transmitter antenna out completely.
The range of the remote control is reduced if the antenna is not
pulled out completely.
CAUTION!
Always turn the transmitter´s power switch ON first!
Switch on the receiver
• Power switch is on the radio box.
• Fix the receiver antenna and wire (see page 82).
• Put the body on and fix it with the body split pins.
f. How to control your model
• Raise the tyres off the ground
• Turn the steering wheel to the right and left as far as it will
go. The wheels are to follow the steering direction.
• If the wheels operate in the opposite direction, operate the
servo Reverse switch (ST in position REV). Left
CARSON Nitrobone RTR 103014
ON
Neutral
Right
13
GB