Switch On Or Off; Pair The Headset - NGS ARTICA PRO User Manual

USER'S MANUAL
WEARING

SWITCH ON OR OFF

1. Press and hold the multifunction key for about 3 seconds, the Blue indicator
light is displayed. This shows the earphone is power on.
2. Press and hold the multifunction key until the Red indicator light is displayed.
This shows the earphone is power off.

PAIR THE HEADSET

If your phone supports the A2DP Bluetooth profile and has a music player
feature, you can use the phone to make and receive calls, and to play music with
the headset.
1. Ensure that your phone or music device is on and the headset is off.
2. Press and hold the multifunction key for about 5 seconds until the Red
indicator light and the Blue indicator light starts to flash quickly.
3. Activate the Bluetooth feature on your phone or music player, and set it to
search for Bluetooth devices.
4. Select the headset Artica Pro from the list of founded devices on your phone
or music player.
5. Enter the passcode 0000 to pair and connect the headset to your device. If
your device does not have a keypad, it may use this passcode by default.
6. When the headset is connected to your device and is ready for use, the Blue
indicator light will flash every 2 seconds.
3
OPERATING
Receiving a call
Short press the Multifunction key to receive an incoming call.
Ending a call
Short press the Multifunction key to end a call
Making a call
When you make a call via the mobile phone, the call will be transferred to your
headset automatically, depending on the phone setup. If your phone does not
support this function, short press the Multifunction key to receive an incoming
call.
Voice call activation *
If your phone supports this feature with the headset, when no call is in progress,
press and hold the multifunction key for about 2 seconds. Proceed as described
in the phone user guide..
Redialing the last number *
To redial the number you last called(if your phone supports this feature with the
headset), when no call is in progress, press the multifunction key twice.
Rejecting a call*
Press the multifunction key twice to reject a call.
Volume control
Press eithervolumn key during a call or when you listen to music to adjust the
volumn.
Note:
The functions with * mark must be supported by your mobile phone. For more
information, referto the User Manual of your mobile phone.