Displays On The Remote - FAZUA evation Guía Rápida

EN

Displays on the remote

→ The display on the remote consists of 11 LEDs (for "b" model) or 5 LED
(for "fX" model).
C
Remote
On the "b" remote you will find 11 LEDs:
• The bottom 10 LEDs C5 serve as an indicator for the charge level
and the pedal support level set.
• The upper LED serves as a status indicator C4 , informing you of
the status of your eBike.
C
Remote
On the "fX" remote you will find 5 LEDs:
• All five LEDs together C5 serve as a display for the charge level and
the pedal support level set.
• The upper of the five LEDs C4 also serves as a status indicator,
informing you about the status of your eBike.
Status display C4
The status display C4 indicates a status change or an existing fault.
If no fault is detected:
• the LED of the status display C4 does not light up (model "b").
or
• the LED of the status display C4 functions as one of the five LEDs
to display the charge level or the support level set C5 (model "fX").
OVERVIEW TABLE "STATUS DISPLAY"
C4
lights up/flashing:
white*
green
yellow
red
* Only applies for model "fX".
14
model "b"
model "fX"
Meaning
Battery flat
Drive system ready for operation
"Soft Fault"; possible to carry on riding, but not
advisable
"Hard Fault"; not possible to carry on riding/
maintenance required