Converting To Stroller Mode; Converting To Trailer Mode - Burley D’Lite Instrucciones Del Propietario Y Manual De Seguridad

Converting to Stroller Mode

1. Pull fork as shown (Figure 14), then rotate wheel down
fully. Fork will automatically secure into the locked
position.
2. Adjust tow bar into the strolling position (Figure 15) by
removing the secondary retaining pin and pulling on
the Quick Receiver release handle, sliding the tow bar
further in towards the trailer until it locks into place,
and then re-installing the secondary retaining pin.

Converting to Trailer Mode

1. Pull fork down (Figure 16) and rotate up into trailer
mode as shown. Fork will automatically lock into
trailer position when positioned correctly (Figure 17).
2. Adjust tow bar into trailer position by removing the
secondary retaining pin and pulling on the Quick
Receiver release handle, sliding the tow bar out away
from the trailer until it locks into place, and then re-
installing the secondary retaining pin.
WARNING
Stroller wheel must always be folded up, in trailer mode,
before pulling behind a bicycle. Failure to position stroller
wheel in trailer mode before cycling could result in an
accident and serious injury or death.
OWNER'S INSTRUCTION & SAFETY MANUAL
Figure 14
Figure 15
Figure 17
BURLEY.COM ENG
Figure 16
7