Hardware Installation; Manual Configuration - AirLive WMM-3000AP Guia De Inicio Rapido

Hardware Installation

1. Setup LAN connection:
connect an Ethernet cable from
your computer's Ethernet port
to one of the LAN ports of this
product
2. Configure your PC:
Make sure your local PC(s) has
wireless network adapter installed

Manual Configuration

You can manually configure this Access Point via a wireless or wired connection.
Step1:
Wireless:
1. For wireless station, make sure your computer has associated with this Access Point.
2. Skip to step 2
Wired:
1. Start your computer. Connect an Ethernet cable between your computer and the Wireless
Access Point.
2. Make sure your wired station is set to the same subnet mask as the Wireless Access Point,
i.e. 192.168.1.10
WMM-3000AP
English
5