GEA ZET1P Instrucciones De Instalación página 2

2 A
CUTOUT FOR SINGLE OVENS IN WALL CABINET
NOTE: If the cabinet does not have a front frame and the sides are less than ¾" (1.9 cm) thick, shim
both sides equally to establish the cutout width.
These ovens
are not
approved for
stackable
installations.
Opening
Between Inside
Walls Must be
at Least 28-1/2"
(72.4 cm) Wide
E
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line Center Line
30.5" (77.5 cm)
30" models
27" (68.58 cm)
27" models
Cutout – Cutout –
observe all observe all
dimensions and dimensions and
requirements. requirements.
2" (5.1 cm) Min.
Dimension Dimension Description
A Cabinet Width
B Cutout Width
C Cutout Height
D Overlap of Oven Over
Side Edges of Cutout
E Clearance to
Adjacent Corners,
Drawers, Walls, etc.,
When Door Is Open
F Overlap of Oven
Top of Cutout
G Overlap of Oven
Bottom of Cutout
H Junction Box Location
H
Junction
B
Box
Location
(junction
box may
be located
in adjacent
cabinet)
F
22" (55.9
D
cm) Min. to
Bottom of
G
Junction
Box
Cutout Depth
23-1/2"
(59.7 cm) Min.
Note: Allow
1/4" (0.64 cm)
clearances
from side
edges of oven
door.
A
27" Single Oven 30" Single Oven
27" (68.6 cm) 30" (76.2 cm)
25" (63.5 cm) min. 28 " (72.4 cm) min.
1 2
25 " (64.1 cm) max. 28 " (72.7 cm) max.
1 4 5 8
27 " (70.2 cm) min. 27 " (69.2 cm) min.
5 8 1 4
28 " (71.4 cm) max. 27 " (69.4 cm) max.
1 8 5 16
1" (2.5 cm) " (1.75 cm)
11 16
23" (50.8 cm) min. 23" (53.3 cm) min.
1" (2.5 cm) min. 1" (2.5 cm) min.
(1 " (3.2 cm) for PT9050,
1 4
ZET1S and ZET1P)
1" (2.5 cm) min. 1 " (3.2 cm)
1 4
8 " (22.2 cm) max. 9 " (24.1 cm) max.
3 4 1 2
right side only right side only
2 B
CUTOUT FOR SINGLE OVENS – UNDER COUNTER
NOTE: These ovens are only approved to be installed under the specific models as labeled on the unit.
C
Recommended
Cutout Location
from Floor
32-1/2" (82.6 cm)
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line
30.5" (77.5 cm) 30" models
27" (68.58 cm) 27" models
Cooktop
Cutout – observe
all dimensions and
requirements.
NOTE: One cooktop may be centered over either oven in
the side-by-side installation.
Dimension Dimension Description
A
B
C
D Unit Overlap Bottom
E Unit Overlap Side Edges
F Junction Box Location
Continue to Section 4.
Center Line
Cutout – observe
all dimensions and
requirements.
2" (5.1 cm) Min.
27" Single Oven
Cabinet Width 25" (63.5 cm) min.
25 " (64.1 cm) max.
1 4
Cutout Height 27 5 8 " (70.2 cm) min.
28 1 8 " (71.4 cm) max.
Unit Overlap Top 1" (2.5 cm)
1" (2.5 cm)
1" (2.5 cm)
8 " (22.2 cm) max.
3 4
right side only
30" Single Oven
28 " (72.4 cm) min.
1 2
28 " (72.7 cm) max.
5 8
27 1 4 " (69.2 cm) min.
27 5 16 " (69.4 cm) max.
1" (2.5 cm)
(1 " (3.2 cm) for PT9050
1 4
ZET1S and ZET1P)
1 " (3.2 cm)
1 4
" (1.75 cm)
11 16
9 " (24.1 cm) max.
1 2
right side only