Setup Instructions - Polygroup SUMMER WAVES CP2000-C Manual Del Usuario

Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.
WARNING:
CLIMBING HAZARD! PLEASE PREVENT CHILDREN FROM CLIMBING ON THE FILTRATION SYSTEM TO GAIN ACCESS TO THE POOL.
1. Set up the pool by following all the instructions that came with
the pool. Do not fill water until the Filter Pump is properly
installed. Locate the Outlet and Inlet openings on the pool wall.
Outlet opening
Inlet
opening
3. Install the Return Fitting on the Inlet opening of the pool.
8
7
6
11
Inside Pool Wall
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.

SETUP INSTRUCTIONS

Outside Pool Wall
9
Extended operating days and hours during peak season requirements.
OWNER'S MANUAL
2. Install the Suction Fitting on the Outlet opening of the pool.
Outside Pool Wall
3
4
4. Remove the Filter Pump
from the package.
2
1
Inside Pool Wall
, Hoses and Hose Clamps
13
15
14
9