Installation of receiver
1. Place the receiver (5) on, or near, the second television set.
2. Connect the receiver (5) to the second television set using the lead (6) following the same
instructions as for the transmitter.
3. Extend the antenna on the receiver (5) and orient it toward the main TV set (TV1). Circular
antennas must be oriented so that the surfaces with inscriptions are face to face.
4. Fit the mains supply lead (7) to the receiver and plug it into a 220/240 V ~ 50 Hz mains
power supply.
! THE ANTENNA allows you to transmit and receive audio and video signals over a maximum range
of 30 meters in free air environments. Inside a typical lodgment the range will be less because of signal
attenuation by building material absorption.
! THE FLEXIBLE ANTENNA permits the control of the unit whose pictures you wish to see in the
room containing the second television set (TV2).
TV2
5
LEFT
RIGHT
IR OUT
VIDEO IN
AUDIO IN
6
6
220/240V ~ 50 Hz
7
DC 6V
UNITED-
KINGDOM -
EIRE
CONTINENTAL
EUROPE