Tabla de contenido
Publicidad
Montaje
Aplicación de Montaje de Botón
Se pueden utilizar opcionalmente los botones de montaje suministrados,
para instalar el PDU en los gabinetes que soportan este método de montaje
del equipo. Utilice los tornillos #8 suministrados para unir los botones de
montaje al PDU.
PK-93384-10-02-0F
26
© 2009 Leviton Manufacturing Co., Inc. Todos los derechos reservados.
Power & Grounding
Connecting to the Power Source
Plug PDU into power source and check that Polarity/Ground OK and Power
LEDs are illuminated. For P107x PDUs, ensure that the Protection LED is also
illuminated.
• All Leviton P1000 Series PDUs come with an attached (hard-wired)
power cord.
• Some PDUs are available with straight or locking plugs (see technical
specifications chart).
Connecting Devices to the PDU
• Leave equipment in the "OFF" position until it is connected to the PDU.
Grounding Devices
Leviton supplies a grounding point with a green grounding screw on the
front of the PDU. Check local codes and regulations for proper grounding
requirements.
NOTE: Leviton recommends even distribution of attached devices across all
available outlets to avoid exceeding the outlet, branch, or phase limitations.
PK-93384-10-02-0F
© 2009 Leviton Manufacturing Co., Inc. All Rights Reserved.
7
Publicidad
Tabla de contenido
