Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PPPoE xDSL: Used for DSL bridge with PPPoE connection.
o
1
Username: Enter your PPPoE username.
2
Password: Enter your password.
3
Service Name: Enter the service name (for example the name of your
Internet Provider).
4
MTU: Enter the MTU size. (If the size is not specified by your Internet
Provider, please leave the default value at 1492.)
5
Connection type:
•
Continuous: The PPP-connection will always be active.
•
Connect on Demand: The PPP-connection will establish when a
computer is accessing the Internet. The PPP connection will
disconnect when there is no more Internet traffic during the Idle
Time (minutes), entered in the field below.
•
Manual: The PPP connection is established / disconnected
manually by clicking Connect / Disconnect.
JClick OK to proceed.
- IP Address info for PPPoE xDSL -
Setup the Broadband Router
5
Publicidad
Tabla de contenido
