Set Up Software; Network Configuration; Get Started With Axis Camera Station - S1016 Mk - Axis S10 Serie Guia De Instalacion

5. Press the power button on the monitor and the computer.

Set Up Software

When the computer has been powered on, the Windows operating system will start. Follow the
instructions displayed on the screen and provide the required information. When the Windows
installation is configured, Get Started Application will start automatically. Follow the steps on
the screen.

Network Configuration

AXIS Camera Station can record and play back video from cameras and video encoders that
are connected to a LAN (Local Area Network) or to a WAN (Wide Area Network). Depending
on the installation, follow the instructions under Network & Security Configuration in
AXIS Camera Station User Manual available at www.axis.com
Get Started with AXIS Camera Station - S1016 Mk II
Start AXIS Camera Station Client and the wizard "Get Started with AXIS Camera Station" starts
automatically. "Get Started with AXIS Camera Station" provides a quick way to add cameras and
to configure and enable recording:
1. Register your pre-installed licenses.
2. Connect to the local S10 server.
3. Select cameras and video encoders to add.
4. Select recording methods and where to store recordings.
5. Review settings and click Finish to add cameras .
6. Start recording and viewing with AXIS Camera Station
AXIS Camera Station S10 Recorder Series
11