WARNINGS: Tubing breakage may result in fluid being sprayed from pump. Use appropriate measures to pro-
tect operator and equipment.
Turn off drive before removing or installing Cartridges. Safety guards are provided to minimize risk
of fingers getting caught between the roller mechanism and the base of the module. However, be
safe—Keep your fingers away from these areas.
CAUTIONS: Excessive occlusion can cause high pump temperatures and early tubing and roller failure. Do not
set occlusion tighter than what is recommended in Table 4.
Use only tubing/cartridge/pump combinations defined by Tables 1, 2, and 3. Use of other
combinations could cause malfunction or damage to the pump.
Operating the pumps at speeds in excess of 250 rpm may result in premature wear of the pump
rollers and tubing.
CAUTION:
Risk of Danger. Consult Operator's manual for nature of hazard and corrective actions.
CAUTION:
Risk of crushing. Keep fingers away from rotor while pump is in operation. Stop pump before load-
ing or unloading tubing.
These products are not designed for, nor intended for use in patient connected applications, including, but not
limited to, medical and dental use and, accordingly, have not been submitted for FDA approval.
SAFETY PRECAUTIONS
Explanation of Symbols
WARNING: PRODUCT USE LIMITATION
2