Haskel M Serie Especificaciones Técnicas Y Datos De Funcionamiento página 3

Maintenance
Disconnect pump from system and remove to a clean, well lit work bench with access to vice, tools, seal
kits and spares. All parts removed for inspection should be washed in a suitable de-greasing agent such
as Blue Gold or equivalent. Inspect all moving parts for wear or scratches. Damaged parts should be
replaced. It is recommended that all seals and O-rings are replaced.
Specially packed seal kits are available for Air Drive and Hydraulic Sections. Seal Kit Part Numbers are:
Air Drive P/N 17178 (common to all standard models)
Hydraulic Section
P/N 17179 (plus ratio no. e.g., 17179-21)
P/N 26410 (plus ratio no.)
P/N 28247 (plus ratio no.)
P/N 51104 (plus ratio no.)
P/N 27901
P/N 53694
P/N 28696
P/N 28695
P/N 51239
P/N 51240
Cross Section of Haskel M- and MS- Series Pump
1/3 HP Pump Series • MLP-20/46S
Model No.
M-21 thru -188
MS-21 thru -188
MCPV-21 thru -110
29723-21thru -110
MDTV-5, MDSTV-5
M-5
M-7
M-12
MS-7
MS-12
3