Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Unit emits odor dur-
ing operation
Compressor
does not
immediately
activate
when power button is
pressed ON
The unit deactivates
The unit does not cool
to satisfaction
Temp reading
has
changed
from °F to
°C
Temp reading has
changed from °C to
°F
Remote Control is
locked
ii
Control
indicator
lights don't illuminate
when unit is running
Possible Causes
Solutions
Q
•
First use of unit, or after
storage of unit in dusty
a rea
................
l.
•
Normal
Operation
• Normal
Operation
• Room temperature
is high
when unit is first turned
ON
* The temperature reading
has been changed using
the remote control
ii
ii
i ii
* The temperature
reading
has been changed
using
the remote control
•
The "-" and "+" buttons
were pressedsimultane-
ously
i•
The control indicator
lights have been turned
off: usingthe remote con-
trol
,
ii
.
,,..
,...
Odor development
can arise upon first
use and after a long period of non-use by
starting
in unsuitable
areas (e.g. dusty
areas}. Run the unit for 1/2 day. The smell
will dissipate
after awhile. In the case of
intense odor development,
air the room.
i•
After pressing POWER
button ON the
compressor
wilt not start for 3 minutes.
Conditioned
air will start to blow once the
compressor
starts, but it may take up to
another 5 minutes
Upon reaching
the set temperature,
the
unit switches off automatically.
Check
temperature
setting.
,,
,.,
,,..,
,
Air conditioners
operate more effectively
if a cooler room temperature
is main-
tained. To adequately
cool the air in a
very warm room requires much more time
and energy.
•
Make sure the unit is powered
OFF. Press
the "MODE"
button and "-" button simul-
taneously
to change back to °F
•
Make sure the unit is powered
OFF. Press
the "MODE"
button and "-" button simul-
taneously
to change back to °C
Press the "-" and "+"
buttons simultane-
ously to unlock the remote control
i . illllrlrl
ill
Press the "+"
and "FAN"
buttons simulta-
neously to illuminate
the control indicator
lights
2O
Publicidad
