Descargar Imprimir esta página

Freqently Asked Questions - Marmitek Easy Icon 10 RF Modo De Empleo

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 49
VOL up and down operates bright and dim if applicable.
You can press the Side Key next to the module you wish to operate and toggle an "On"
or "Off" function as well.
MACROS
Macros allow you to combine a number of commands, including time delays, by using
a single key press.
Press the Home key.
At the screen shown, press the Side Key for Macros and press OK to access the first
time Macro's Wizard.
Press the Pick Module Side Key.
Select the room, which contains the TM13 that you want the Macro for.
Press the Side Key next to the icon that you choose for the TM13.
Select the On Side Key.
Press the Set Delay Side Key once for each second of delay you wish to add to the
Macro.
Press the Pick Module Side Key.
Press the Side Key next to the icon that you choose for the TM13.
Select the Off Side Key.
Select Save and then Done using the Side Keys.
Note: When you want to create another Macro, you must do the following:
Press Home, then the Setup Side Key.
Press the X10 Macros Side Key.
You'll notice that the M 1 Side Key is a green color and that the remaining Macro
numbers are black in color. Green signifies a Macro that has already been created,
while black indicates an unused Macro placeholder. You'll want to choose any of the
black Macro number to set up a new Macro.

FREQENTLY ASKED QUESTIONS

What is the reason for modules to switch on/off spontaneously?
It is possible that a Marmitek X-10 System is installed at one of your neighbours using
the same House Code. To solve this problem try to change the House Code of your sys-
tem, or have FD10 Phase Coupler/Filter installed at your incoming mains.
My modules will not respond to my controller.
Make sure that the House Code on all Modules and Controllers are set to the same
House Code (A .. P).
My modules will not react to my remote / sensor.
When you use a remote or sensor, you should have at least one TM13 Transceiver or
Marmitek X-10 Security Console installed in your house. These components will trans-
14
© MARMITEK

Publicidad

loading