Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483
GENERAL INFORMATION
EccoFlo realizes that in many instances our pump is being installed as a replacement pump within an
existing system. The following guides should be considered to achieve optimum pump operation.
Always follow all local or national installation codes & standards.
2- ½" Threaded
Adapters
Notice: To help reduce noise and vibration of the pump through the system use flexible lines
on the inlet and outlet of the pump as shown above. Be sure to use lines rated to not collapse
under pump vacuum.
Support: Eccotemp.com/help-desk
Inspect Your Shipment:
12V Pump
1- ½"- Barbed
Adapter 90°
Shop Online: Eccotemp.com/products
Sediment Strainer
1- ½" Barbed
1 - Red/Black
Adapter
NO
Component
1
Pressure switch
2
3
Valve plate assembly
4
Diaphragm/Drive assembly
5
Store Locator: Eccotemp.com/locator
(+/-) clips
Pump head
Motor
3