Safety And General Information; Product Description - Omega Lift Equipment 47050C Instrucciones De Funcionamiento Y Manual De Piezas

SAFETY and GENERAL INFORMATION

Save these instructions. For your safety, read, understand, and follow the information provided with and on this wheel
dolly before using. The owner and/or operator of this equipment shall have an understanding of this equipment and
safe operating procedures before attempting to use. The owner and/or operator shall be aware that use and repair
of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in
the operator's native language before use of this product is authorized. If any doubt exists as to the safe and proper
use of this wheel dolly, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any
wheel dolly that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service
immediately and the manufacturer notified. If you suspect that the product was subjected to a shock load (a load
dropped suddenly, unexpectedly upon it), immediately discontinue use until it has been checked by a factory authorized
service center (contact distributor or manufacturer for list of Authorized Service Centers). It is recommended that an
annual inspection be done by qualified personnel. Labels and owner's manuals are available from manufacturer.

PRODUCT DESCRIPTION

Hydraulic wheel dolly is designed to facilitate the removal and installation of pneumatic tires and wheel assemblies
found on many trucks, buses and trailers. This is NOT suitable for use as a wheel and tire puller. It is designed ONLY
for use in removing up to rated capacity tire and wheel assemblies which are not bound and/or seized up at the brake
drum or hub assemblies. This device is designed to be used in conjunction with jacks and jack stands
!
WARNING: NEVER load this device with more than the weight of the wheel assembly to be removed!
ENSURE that the vehicle is securely positioned and supported by mechanical means such as a pair of
appropriately rated jack stands or cribbing and blocking.
!
WARNING: NEVER use a wheel dolly as a wheel pulling device. Before transporting wheel assembly
ensure that it is free from the hub or drum assembly and that it is secured to the wheel dolly using the
provided securing means. NEVER load this device with more than the weight of the wheel assembly to be
removed!
SPECIFICATIONS
Model Capacity
47050C
3/4 Ton
1500 lbs.
47053
Angle Frame
Hydraulic Unit
Lifting Member
Figure 1 - 47050C Wheel Dolly Components
Product Size
(L X W X H)
45-1/8" X 39-1/2" X 34-7/8"
43-1/2" X 43" X 34-7/8"
Chain
Hook
Main Frame
Front Wheel
Lifting Member
Dimension
27-1/2" X 26" 2-1/2" - 8-3/8" -2° - 5°
25-7/8" X 25-1/4" 2-1/4" - 11"
Main Frame
Lifting Arms
Figure 2 - 47053 Wheel Dolly Components
2
Lifting Tilt
Range Range
-2° - 5°
Chain
Load Leveler
Hydraulic Unit
Support Strap
Front Caster
Weight
193 Lbs.
151 Lbs.
Handle