Sleep Operation - Sharp XL-BB20D Manual De Manejo

Timer and sleep operation (Remote control only) (continued)
12
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The timer indicator will blink during
timer playback.
13
When the timer end time is reached, the system will
enter the power standby mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every selected
day. Cancel the daily timer when it is not in use.
Notes:
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN or LINE
IN socket, select "USB" or "AUDIO IN" or "LINE IN" in
step 5. This unit will turn on or enter the power standby
mode automatically. However, the connected unit will
not turn on or off.
● To stop the timer playback, follow step "Cancelling
the timer setting" of this page.
Checking the timer setting:
1
Turn the power on. Press the TIMER button.
2
Press the or
"Daily", and press the ENTER button.
3
Press the or
Call", and press the ENTER button.
Cancelling the timer setting:
1
Turn the power on. Press the TIMER button.
2
Press the or
"Daily", and press the ENTER button.
3
Press the or
Off", and press the ENTER button. Timer will be can-
celled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
1
Turn the power on. Press the TIMER button.
2
Press the or
"Daily", and press the ENTER button.
3
Press the or
On" , and press the ENTER button.
4
Press the (ON/STANDBY) button to enter the power
standby mode.
button to select "Once" or
button to select "Timer
button to select "Once" or
button to select "Timer
button to select "Once" or
button to select "Timer
EN-19

■ Sleep operation

The radio, disc, USB, Audio In, Line In, and Bluetooth can
all be turned off automatically.
1
Play back the desired sound source.
2
Press the SLEEP button.
3
Within 5 seconds, press the SLEEP button repeatedly
to select the time.
"Sleep 90" "Sleep 80" ...
4
"SLEEP" indicator will appear.
5
The unit will enter the power standby mode automati-
cally after the preset time has elapsed. The volume will
be turned down 1 minute before the sleep operation
finishes.
To confirm the remaining sleep time:
1
While "SLEEP" is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the (ON/STANDBY) button while "SLEEP" is indi-
cated. To cancel the sleep operation without setting the
unit to the standby mode, proceed as follows.
1
While "SLEEP" is indicated, press the SLEEP button.
2
Within 5 seconds, press the SLEEP button repeatedly
until "Sleep Off" appears.
■ To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD the next morning.
1
Set the sleep time (see above, steps 1 - 5).
2
While the sleep timer is set, set the timer playback
(steps 2 - 10, page 18).
Sleep timer Timer playback
setting setting
1-90 minutes
Sleep operation will
automatically stop
"Sleep 10"
"Sleep Off"
End time
Desired time
Timer playback start
time