Turning The Power On/Off; Symbols Used In These Operating Instructions; Display Language - Panasonic KX-TG7150EX Manual De Instrucciones

TG7150-7170EX(e).book Page 12 Thursday, August 10, 2006 10:40 AM
Preparation
Battery strength
Battery icon Battery strength
High
5
Medium
6
Low
7
When flashing: Needs
to be charged.
Panasonic Ni-MH battery performance
(included batteries)
Operation
In continuous use
In continuous
standby mode
Note:
L It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
L Actual battery performance depends on a
combination of how often the handset is in
use and how often it is not in use
(standby).
L Battery operating time may be shortened
over time depending on usage conditions
and ambient temperature.
L Even after the handset is fully charged,
the handset can be left on the base unit
without any ill effect on the batteries.
L The battery strength may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit and charge for at least 7 hours.
12

Turning the power on/off

Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Symbols used in these
Operating time
KX-TG7150: operating instructions
12 hours max.
KX-TG7170:
Symbol
10 hours max.
{j/OK} Press {j/OK}.
150 hours max.
i
" "

Display language

14 display languages are available.
You can select You can select "Deutsch
English","Espa
"English
"NORSK NORSK", , "FRANCAIS
"Dansk Dansk", , "Nederlands
"Suomi Suomi", , "EKKGMIJA
"Portugu Português", , or
1
2
3
4
5
Meaning
Proceed to the next operation.
Select the words in quotations
shown on the display (e.g.,
"Handset Setup") by
pressing {^} or {V}.
Deutsch", ,
ol", ,
Español
FRANCAIS", , "Italiano
Italiano",
Nederlands", , "Svenska
EKKGMIJA", , "Türk
or "Catal
Català".
{ih} i {j/OK}
Press {^} or {V} to select "Handset
Setup". i {>}
Press {^} or {V} to select "Display
Setup". i {>}
Press {^} or {V} to select "Select
Language". i {>}
Press {^} or {V} to select the desired
language. i {>} i {ih}
Svenska",
rkçe",