General Maintenance - QEP 10675Q Manual De Operación

GENERAL MAINTENANCE

1. Oil should not be used on the 10675Q QEP Tile Cutter. Use of oil will cause eventual
gumming and sticking of the movable parts as the oil combines with dirt and ceramic
tile dust.
2. Wear is normal in the chrome plated rails and can be evenly distributed by occasional
rotation of each of the two rails. For cutters with hex bolts holding the rails, loosen
each bolt and slightly rotate the rails. Retighten the hex bolts when finished.
3. The only part routinely needing replacement is the carbide scoring wheel. All other
parts are also available.
-4-