FenSens FENEU1 Manual De Usuario página 12

instance if you must drill 2 extra holes for your device to be mounted.
3.
Once the frame is mounted onto the car, slide the license plate up
between the side tabs and underneath the top tabs, pushing until
snapped into place.
4.
Take the bottom panel and align the tabs on the back-end with the slots
on the bottom of the frame. Press firmly along the panel to snap it into
place. Then use the 3 provided security screws to secure it to the frame.
Use the included custom screwdriver to screw them into the device. It's
important to use the custom security screws included with your kit as
these screws will help prevent people from stealing your device. Fully
tighten the screws so the device is secure.
5.
Make sure your registration tabs and plate numbers are fully visible
to stay legally compliant. Please refer to local rules and regulations
regarding license plate visibility.
6.
Wiggle your device to ensure it is fully screwed in and secure.
10
2
3
4