Usage Restrictions - Seac T5 Instrucciones

charged the LED will turn green or turn off. Unplug the connector plugged to
the power adapter or computer USB port first, and then unplug the micro-
USB connector from the charger.
Avoid leaving the battery connected to the power once it is charged, and
in any event not longer than a few hours.
Failure to do so could cause damage to the product and pose a danger
to people and/or things.
FLOODING
If water gets into the torch, open the body, remove the battery and
immediately rinse the internal parts in fresh water. Then dry everything with
a cloth and a hair dryer using warm air, paying close attention to mechanical
parts. Remove any rust that may have formed on the metal parts and conduct
an operations test.
If a significant quantity of water has entered the torch and has remained there
for a long period, open the torch body and immediately rinse the internal
parts in fresh water. We suggest that you immediately contact a competent
repair center or contact the closest SEAC shop.

USAGE RESTRICTIONS

• The maximum operating depth is 100 m.
• Because of the high temperatures that can arise in the torch when used out
of the water, we recommend that you use it exclusively underwater.
MAINTENANCE AND TRANSPORT
It is important to abide by the following instructions:
• Always transport the torch in a bag that will protect it from any blows.
• When you aren't using the torch, always make sure you have fully inserted
the safety in order to prevent the torch from switching on accidentally,
which could cause fires. For extended transport in the trunk or hold, it's
good practice to always remove the batteries from the torch. This provision
may be mandatory with certain airlines.
• Avoid prolonged exposure to the sun.
• After a dive (sea, lake, or pool), always rinse with fresh water and dry.
16
797 - Manuale Seac torce serie T5 - TOTALE.indb 16

WARNING
12/09/2018 14:36:52