Yakima BOA Guia De Inicio Rapido página 3

Load your bike's forks.
Attach hex
key but do not
tighten.
Release a
strap end by
pressing the
red button.
Rest the rear wheel
into the tray.
1033569C-3/12
Set the bicycle forks
vertically onto the skewer.
Prevent damage
to your forks!
use extra caution when
installing, or removing bikes with
CARBOn FiBER FORkS. Fork tips
can crack, or bend if bike is not
loaded vertically.
ROUND BARS:
Rotate wheel tray to
accommodate bike wheel.
Tighten the hex key.
If tray can move on the bar,
tighten the hex key.
with lever open, tighten
adjustment knob clockwise
until the lever closes with
FiRM resistance.
noTE: Shaft will turn
with adjustment knob.
tESt yOuR inStALLAtiOn! if forks can move in the mount,
open the lever and tighten the adjustment knob more.
SQUARE BARS:
you may need to reposition
the bolt as in Step 9 to
angle the tray.
Tighten the hex key.
Your bike's forks are secure
onLY after the lever closes
with solid resistance.
Secure the
Rear Wheel.
insert strap
end behind red
button.
Pull the strap
tightly against
the wheel rim.