Operating & Maintenance Tips - General DCIS4 Manual Del Usuario

Camera Head Diameter
Camera Depth of Field
Camera Field of View
Probe Length
Probe Minimum Bending Radius
Dust & Water Resistance Rating
(Probe & Camera Head only)
Operating Temperature
Dimensions of Grip
Weight of Grip (without batteries), 9.6 oz. (272g)
Probe and Probe-Tip Accessories
Power Source
Life of Full Battery Charge
OPERATING & MAINTENANCE TIPS
Never insert the probe into a fuel tank or a flammable liquid or gas such as
unleaded gasoline, diesel fuel, machine oil, DOT 4 brake fluid or transmission
fluid.
The probe contains thin wires running along its entire length. Accordingly,
handle it with care:
• Do not bend it more than 90° anywhere along its length.
• Do not bend the probe more than 70° within 1.2 in. (30mm) of its camera tip.
• Do not bundle the probe into a tight circle to store it.
• Never use the camera end to clear its own path of debris.
To clean the camera lens and LEDs, use a cotton swab and a small amount of
mild detergent.
The grip requires no routine maintenance other than periodic cleaning with a
soft, dry cloth. Never use a wet cloth, corrosive liquids, solvents or water. Avoid
getting the grip wet.
Store iBorescope4 only in a cool (under 122°F or 50°C), dry, well-ventilated
place. Avoid exposing the unit to sunlight for long periods of time.
iBorescope4 is designed for industrial and environmental use only. Never use it
for human or any other biological inspection.
8mm (0.32 in.)
1.2 in. to 10 ft. (30mm to 3m)
54°
36 in. (914mm)
1.77 in. (45mm)
IP67
32° to 113°F (0° to 45°C)@15 to 85%RH,
non-condensing
7.25 x 3.75 x 1.4 in. (184 x 95 x 36mm)
(4) "AA" batteries (not included)
3 hours, typical
19