Playback - Sony SVT-L400 Manual De Instrucciones

Playback

1 2
SHARPNESS p STOP 0
1
Turn on the power of the equipment to be used.
2
Insert the cassette.
3
Select the playback speed by pressing REC/PLAY
SPEED –/+.
The selected playback speed is displayed in the
display window.
4
Press z PLAY.
Playback starts.
To stop playback
Press p STOP.
To rewind the tape
Press p STOP and then 0 REW.
To fast-forward the tape
Press p STOP and then ) FF.
To adjust the sharpness of the picture
Turn SHARPNESS to SHARP for a sharper picture or
to SOFT for a softer picture.
Resetting the tape counter
The tape counter in the display window helps you to
locate a certain scene after playback. Press COUNTER
RESET to set the counter to "0H00M00S" (counter
zero) position before playing back the tape. The VCR
keeps counting the length of the tape being played
back. Note, however, that the tape counter will not
count the portions without video signals.
Notes
• You cannot play back the tapes recorded on other
time-lapse VCR on this VCR and vice versa.
• Play back the tape at the same speed at which it was
recorded so that you can monitor the sound normally.
32
4 3
) COUNTER
REW FF RESET
Playback speed
You can view the playback picture at one of the
following speeds.
Playback speed (Hour)
Recording
speed 6 (8)
18 (24) 30 (40)
6 (8)
1 1/3
1/5
18 (24)
3 1 3/5
30 (40)
5 5/3 1
48 (64) 8
8/3 8/5
72 (96) 12 4
12/5
96 (126)
16 16/3 16/5
120 (160)
20 20/3 4
168 (224) 28
28/3 28/5
For example, when a tape recorded in 168-hour mode
is played back in 6-hour mode, you can view the
playback picture at a speed 28 times faster than the
recorded one.
48 (64) 168 (224)
72 (96) 96 (126) 120 (160)
1/8 1/16 1/28
1/12 1/20
3/8 1/4 3/16 3/20 3/28
5/8
5/12 5/16 1/4 5/28
1 2/7
2/3 1/2 2/5
3/2 3/4 3/7
1 3/5
2 4/3 1 4/5 4/7
5/2
5/3 5/4 1 5/7
7/2 1
7/3 7/4 7/5