What's in the box
• Subwoofer
• Satellites (two)
• Satellite stands (two)
• Desktop controller with attached interface cable
• Satellite cable set (two cables)
• 3.5mm-to-RCA PC audio cable
• Power cable
• Hook-and-loop fastening tape dots
• Quick start guide (this booklet)
Installation
Proper satellite placement
The satellites have an asymmetrical design, with
the tweeter closer to the center of the sound field.
This design philosophy, similar to that used with
studio monitors, allows for superior stereo imaging
and for the use of sufficiently large drivers in a
compact enclosure. When placing the satellites on
the desktop, make sure they are oriented as shown
in the illustration.
Optional: using the satellite stands
While the Gaming Audio Series SP2500 will provide
fantastic sound at almost any angle, for optimal stereo
imaging, you will want to make sure that the satellites
are aimed at the listener. See "Tips for the best sound"
later in this guide for more information.
The satellites have an upward angle of 2.5 degrees.
To increase the upward angle to 11 degrees, place
the satellite stands under the front feet. To give the
satellites a downward angle (for instance, if you will
be placing them on a shelf), place the stands under
the rear feet.
Tips for subwoofer placement
For best results, place the subwoofer with the port
facing towards you. In case of placement near an
object in front of the port, you should allow at least
25cm (10 inches) of clearance between the port and
the object.
25cm (10")
3