Corsair Gaming Audio Serie Manual Del Usuario página 9

Tips for the best sound
Setting the output level on your PC and your other devices
Most PCs with built-in audio, as well as most PC sound cards, have audio circuitry that's capable of playing at
100% volume without distortion. For best results, we recommend setting your PC's audio output to maximum, and
using the Gaming Audio Series SP2500 controller to adjust the volume. Of course, there are exceptions, and if you
detect distortion when your PC's volume is set to 100%, lower it accordingly.
However, many portable digital audio players use audio circuitry that cannot be used at 100% volume without
noticeable distortion. When connecting a digital audio player to the SP2500, we recommend setting the player's
volume at approximately 80%, and lowering it if you detect distortion.
Use a high-quality sound card
A high-quality speaker system is just one part of getting great sound out of your PC. If you've connected the
SP2500 to your PC's built-in audio circuitry, consider making the investment in a high-quality add-in sound card.
Dedicated sound cards often provide greater dynamic range, a higher signal-to-noise ratio, and lower distortion
than the audio circuitry built into motherboards.
Don't forget the satellite stands
The SP2500 satellites are engineered to provide excellent soundstaging – that level of sonic accuracy that
allows you to close your eyes and get a strong feeling for the audio environment and the exact placement of the
performers (or sound effects) within it. As with all speaker systems, the SP2500 has a "sweet spot" in which the
best sound staging presentation is heard, and you'll be in that sweet spot when the satellites are directed toward
your ears.
The satellite feet are designed to angle the satellites upward, but don't hesitate to place the satellite stands under
the front feet if you need a little more lift. Likewise, if you'll be placing the satellites above your head, you can
place the stands under the rear feat to give them a downward angle.
Specifications
Frequency response: 35Hz – 20kHz ±3dB
n
220 Watts total power
n
Subwoofer dimensions: 46 x 25.8 x 29.7 cm
n
Satellite dimensions: 10.8 x 12 x 15.9 cm
n
Subwoofer
20.3cm 120W (IEC60268-5 24hr continuous
n
rating) subwoofer with durable rubber surround
Bridged dual 60 Watt class-D amplifiers with
n
integrated DSP for 120 Watts of power
Ultra-efficient integral power supply with
n
100V – 240V AC input
Satellites
Bi-amplified, two-way design 76.2mm 40W
n
(IEC60268-5 24hr continuous rating)
midrange drivers
25.4mm 40W (IEC60268-5 24hr continuous
n
rating) ferrofluid-cooled silk diaphragm
tweeters
50 Watts per satellite:
n
• 40 Watt midrange amplifiers
• 10 Watt tweeter amplifiers
7