2. Setup instructions
Settings are made via the controller on the base unit UFG 3xx
(refer to the operating instructions for the base unit).
The controller software version must be ≥ 8.0 for this channel unit.
General notes:
• To display the software version for the boot loader, the controller and the channel unit, press
the "<<", ">>" and "?" keys at the same time.
• To obtain more information on the selected parameter, press the "?" key.
• New channel unit data should only be saved using the red save key when the module has
successfully completed its search and the required television programme appears on the display.
2.1 Selecting the twin unit
I
I
C 10
TV
Das Erste
Outp.
C 12
stereo
Vol
2.2 Selecting the input channel
I
C 10
C 10
TV
Das Erste
Outp.
C 12
stereo
Vol
2.3 Additional input parameters on the sub-menu
***
UFO 354
Frequency
212,5 MHz
RF bandwidth
7 MHz
C/N 15 dB
Prio non
C/N 15 dB
2.4 Selecting between TV and radio programme
I
C 10
TV
TV
Das Erste
Outp.
C 12
stereo
Vol 0 dB
Select the "twin unit parameter".
212,5 MHz
Change the display to the required
deu
twin unit using "<<" or ">>".
224,25 MHz
+ 0 dB
After selecting the field for the input channel, select the required
212,5 MHz
channel, e.g. C 10 using the "+" and "-" keys on the controller.
deu
The input frequency displayed is the channel centre frequency.
224,25 MHz
The input channels can be set in 7-MHz or 8-MHz steps dependent
+ 0 dB
on the TV standard selected.
After you have selected the parameter for the input channel (e.g. C 10)
***
and pressed the sub-menu key, the following parameters appear on the
display:
- Input frequency; adjustable in 500-kHz steps
- RF bandwidth, adjustable for VHF range
- For 7-MHz channel grid - RF bandwidth: 7 MHz
- For 8-MHz channel grid - RF bandwidth: 8 MHz
UHF range: channel grid 8 MHz fixed, for this reason RF bandwidth
cannot be selected
- C/N.
After you have selected the field for the TV/Ra parameter, set the
212,5 MHz
required reception type using the "+" and "-" keys on the controller:
deu
"TV" = TV programme
224,25 MHz
"Ra" = Radio programme