Installation Guide - Phonocar VM 023 Manual De Instruccion

Installation guide

Installations Procedures
Carefully complete the electrical connections.
Check connections before operation.
Reset
Press to flip down the panel. Then press
the Reset hole with a pointed object to reset
the unit to restore the system to the original
factory settings.
Installation opening
This unit can be installed in any dashboard
with a suitable 183mm(w) x 52mm (h) opening
as shown above. The dashboard should be
4.75 mm - 5.56 mm thick in order to be able
to support the unit.
1 - Insert mounting collar into
the dash board, and mounting
tabs out with a screwdriver.
Make sure that lock lever is flush
with the mounting collar(not
projecting outward).
2 - Secure the rear of the unit.
After fixing mounting bolt and
power connector, fix the rear of
the unit to the car body with the
supplied rubber cushion.
3 - Insert trim plate.
IMPORTANT:
Remove these two screws before installation. Otherwise, the CD/MP3 Player will not work.
Reset
36