Restoring The Factory Default Setup; Communication With A Computer - Gram FH Serie Manual De Utilización

RESTORINg THE FACTORy DEFAULT SETUP

1. Press the
"PrInT".
2. Press the
3. Press the
to weighing mode. Factory default setup is finished.

COMMUNICATION WITH A COMPUTER

The balance keyboard functions can be accessed via the RS-232 interface.
The following commands are available:
U –
T –
C –
P –
% -
# -
M –
When a balance is connected to a computer, it is suggested that immediate
print # be used. In response to this command the balance will transmit
whatever number or message appears on the balance display.
The string format output is shown below:
22
key while pressing the
key repeatedly until it reads "InITIA".
key to confirm, the display reads "bUSy" and the returns
: units conversion
: tare function
: calibration with external standard weight
: print function
: percent function
: instant print
: counting function
key the display will show