Rs-232 Interface Hardware - Gram FH Serie Manual De Utilización

A b C D E F g H I J k L M
A - +/-: Signs field, usually no display as a space when it is a positive
number, "-" is displayed when it is a negative number.
b – g:
Number and decimal field, spaces are used when there are less
than six digits.
H – I:
Spaces fields.
J:
Unit field, it describes the units of the number being transmitted. Your
balance will transmit g for grams, O for ounces and C for carats.
k: Stable character, it corresponds to the Ok indicator on the display. S
means the reading is stable, space means the reading is not stable.
L:
Return character.
M:
Line feeds character, it indicates the line feeds.

RS-232 INTERFACE HARDWARE

This balance adopts the transmit and receive lines of standard RS-232.
The data format is:
1 start bit.
8 data bits include parity.
1 stop bit.
The instruction to connect the balance to external device is as follows:
23