Neckstrap Attachment; Tripod Socket; Waterproof/Fogproof - Bushnell TROPHY XLT Manual De Instrucciones

NECKSTRAP ATTACHMENT

Thread the ends of the neckstrap through the strap lugs on each side of the binocular, then back
through the plastic buckle. Adjust the position of the binoculars on your chest as they hang around
your neck to your preference by changing the length of the strap portion which passes through the lug
and buckle (by an equal amount on each side).

TRIPOD SOCKET

The 8x42, 10x42 and 12x50 Trophy XLTs are tripod adaptable. To attach one
of these models to a tripod or monopod, unscrew (counter-clockwise) the "B"
logo cap which covers the threaded socket inside the center hinge, and set it
aside in a safe place (the "B" cap is not removable on the smaller 28 and 32mm
models). Use a compatible binocular tripod adapter, such as the Bushnell model
#161001CM, (an accessory bracket, shown here, which attaches between the
binocular and tripod) to attach your Trophy XLT to any standard tripod in a
Binocular Tripod
horizontal position to provide a stable image during prolonged viewing.
Adapter (optional)
(Bushnell#161001CM)
Note: The #161001CM does not allow the full range of hinge movement (IPD
adjustment) with the 12x50 model, therefore the Bushnell Universal Tripod
Adapter #19150 is recommended for the 12x50 Trophy XLT.
WATERPROOF / FOGPROOF
Your Bushnell Trophy XLT binocular has been designed and built utilizing the latest waterproof and
fogproof technology.
8