Connecting An Electric Dryer; Tools You Will Need; Power Cords - GE GFD85 Manual De Usuario

CONNECTING AN ELECTRIC DRYER

(Skip for gas dryers and if your dryer already has a power cord attached)

TOOLS YOU WILL NEED

Slip-joint pliers
Flat-blade
screwdriver
MATERIALS YOU WILL NEED
4" dia. metal elbow
Metal strain relief clamp
(UL recognized)
4" Duct clamps (2) or
4" spring clamps (2)
Safety glasses
4" dia. metal duct
(recommended)
4" dia., UL-listed
flexible metal duct
(if needed)
Access Panel
(Kit WE16X29317)
(if needed)
20
Installation Instructions
Phillips
screwdriver
Level
Gloves
Exhaust hood
Duct tape
Dryer power cord kit
(not provided with
dryer)
UL rated 120/240V,
30A with 3 or 4 prongs.
Identify the plug type
as per the house
receptacle before
purchasing line cord.
Stacking installations
may require a power
cord up to 6 feet in
length.
Before making the electrical connection, turn off the
circuit breaker(s) or remove the dryer's circuit fuse(s) at
the electrical box. Be sure the dryer cord is unplugged
from the wall. NEVER LEAVE THE ACCESS COVER
OFF THE TERMINAL BLOCK.
WARNING
- Electrical Shock Hazard
Disconnect power supply before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.

POWER CORDS

GE Appliances strongly recommends the use of
factory specified parts. Select the power cord to fit your
installation requirements.
Part Number Type
WX9X2 3-Prong
WX9X3 3-Prong
WX9X4 3-Prong
WX9X18 4-Prong
WX9X19 4-Prong
WX9X20 4-Prong
Order on-line at GEApplianceparts.com today,
24 hours a day or by phone at 877.959.8688 during
normal business hours. In Canada, visit your local
GE Appliances parts distributor or call 800.661.1616 or
GEAppliances.ca/en/products/parts-filters-accessories.
Length Amperage
4 Feet 30
5 Feet 30
6 Feet 30
4 Feet 30
5 Feet 30
6 Feet 30
49-3000206 Rev 1