Technical Data; Maintenance Instructions - Desoutter D53-150 User Manual

6159939300_04
Original instructions
© Copyright 2018, Ets Georges Renault
44818 St Herblain, FR
All rights reserved. Any unauthorized use
or copying of the contents or part thereof is
prohibited. This applies in particular to trademarks,
model denominations, part numbers and
drawings. Use only authorized parts. Any damage
or malfunction caused by the use of unauthorised
parts is not covered by Warranty or Product
Liability.
STATEMENT OF USE
This product is designed for holding power tools
within the specified load / torque capacity.
No other use permitted.
For professional use only.

TECHNICAL DATA

Working temperature: -10°C / +40°C.
Humidity ratio: 0 / 90%.
Indoor use only.
INSTALLATION
Installing the torque arm
A
See page 7.
Before you start the installation, measure the
applicable position of the torque arm for your
working area.
Fasten the torque arm base with 4 screws (not
supplied) on a perfectly horizontal bench. Tighten
the screws until the torque arm is properly
seated.
Installing the balancer
B
See page 7.
Before you start the installation, measure the
applicable position of the torque arm for your
working area.
CAUTION!
Depending on the size and weight of the
parts to be installed, a second person
will be required to help to carry out
installation step C.
1. After the footpart (1) has been fastened, the
horizontal unit (2) is pushed onto the upright
shaft (3).
C
See page 7.
2. Now install the balancer (5). To do this, the
spring hook (4) is hooked into the link of the
horizontal unit (2).
3. Lift the horizontal unit (2) until the balancer (5)
can be inserted into the upright shaft (3).
D
See page 7.

MAINTENANCE INSTRUCTIONS

Maintenance should be performed by qualified
personnel only.
● Prior to any maintenance task: disconnect the
tool.
● Grease bushing on the arm yearly.
When disposing of components,
lubricants, etc ... ensure that the
relevant safety procedures are carried
out.
DESOUTTER WARRANTY
1. This Desoutter product is warranted against
defective workmanship or materials, for a
maximum period of 12 months following the
date of purchase from Desoutter or its agents,
provided that its usage is limited to single shift
operation throughout that period. If the usage
rate exceeds that of single shift operation, the
warranty period shall be reduced on a prorata
basis.
2. If, during the warranty period, the product
appears to be defective in workmanship or
materials, it should be returned to Desoutter or
its agents, together with a short description of
the alleged defect. Desoutter shall, at its sole
discretion, arrange to repair or replace free of
charge such items as are deemed faulty by
reason of defective workmanship or materials.
3. This warranty ceases to apply to products
which have been abused, misused or modified,
or which have been repaired using other than
genuine Desoutter spare parts or by someone
other than Desoutter or its authorized service
agents.
4. Should Desoutter incur any expense
correcting a defect resulting from abuse,
misuse, accidental damage or unauthorized
modification, they will require that such
expense shall be defrayed in full.
5. Desoutter accepts no claim for labour or other
expenditure made upon defective products.
6. Any direct, incidental or consequential
damages whatsoever arising from any defect
are expressly excluded.
7. This warranty is given in lieu of all other
warranties, or conditions, expressed or implied,
as to the quality, merchantability or fitness for
any particular purpose.
8. No one, whether an agent, servant or
employee of Desoutter, is authorized to add to
or modify the terms of this limited warranty in
any way.
8 / 40
English
12/2018