Thermador VCIN60RP Instrucciones De Instalación página 19

5. Insert the second end of the 3 ft. input/power harness
into the mounting hole, as indicated below, until it
clicks.
f) On the outside of the hood, connect the 30 ft.
extension harness to the protruding end of the 3 ft.
input/power harness.
Installation Instructions
Figure 25: Interior Mounting Hole
Figure 26: Exterior Mounting Hole
4. Route the 30 ft extension harness to the remote control
cutout. Connect the 30 ft. extension harness to the
second 3 ft. input/power harness.
5. Connect the small end of the 3 ft. input/power harness
to the remote control.
6. Insert the remote control into the cutout. Secure from
behind with two (2) nuts onto the weld studs.
inches (millimeters)
ʺ
1 /16
1
(27)
7. Reinstall the junction box cover, filters and grease
trays.
Figure 27: Harness Connection
ʺ
5 /16 (8)
ʺ
1 /16
13
(332)
Figure 28: Remote Control Cutout
English | 18 |
5 ʺ
3
/16
(84)