Lenco HPW-400 Manual Del Usuario página 12

4.
INSTALLATION
4.1
Base:
1.
Connect the
included power
adaptor with the DC
IN input at the rear
of the base and
insert the adaptor
into a 230V wall
socket.
2.
Take the audio connecting wire and plug one side into the AUDIO IN
input at the rear of the base.
3.
Depending on the audio source to which the HPW-400 must be
connected, one of the following situations may be applied:
3.5mm earphones connection:
This is the most commonly used connecting method for headsets or
earphones. Directly connect the wire to this connector.
RCA or Cinch connection:
This connection is commonly used for somewhat more professional
applications or for equipment without earphones or headsets
connections. In this case, use the audio adaptor wire.
12