Connecting Bluetooth Devices - Lenco PDR-040 Manual Del Usuario

9.3.3. Tuning FM radio station
● Tune the desired station from the station list (program list) step by step by
short press " (03) " or "
0. 05MHZ and short press the "Rotary button (07) "button, to confirm the
selection.
9.3.4. Displaying FM station information
● To display information on the current FM station, short press the
"MENU/INFO (02)" button repeatedly.
- The display will show the Information from the provider (e. g. the title
of the song,) battery level, the current channel and frequency, the
current time and date.
9.4. Manually Store/Access FM Stations
9.4.1. Manually store the stations.
In FM mode,
● Short press "
(03) " or "
- Display shows the Frequency and/or < the name of the radio station >.
● Press and hold "PRESET (05) " button and Rotate the "Rotary button (07) "
to select store location (P1 to P30) and short press the "Rotary button
(07) " to store the station to the selected preset.
● Press and hold "Number button (06)", you could choose 1-5 which you
like to directly store the preset stations. (refer to 9. 5. 3)
9.4.2. Select stored FM stations
● Short press the "PRESET (05)" button to open program list. You will find
your stored stations here (P1 to P30).
● Rotate the "Rotary button (07)" and Press "Rotary button (07) "to select
the stored Station.
Or press the "Number button (06)" to select the stored stations.
9.4.3. Store preset 1, 2, 3, 4 or 5
Directly store to a preset button
When you found a favorite FM station
● You can simply long press one of the preset number buttons (1, 2, 3, 4, or
5) to directly store the current station into a preset list.
- Display shows: < Preset (Number) stored >.
NOTE: If there is already a FM station stored in the preset you have
selected, the new station replaces it.
9.4.4. Access preset 1, 2, 3, 4 or 5
Directly access preset buttons 1 - 5
In FM mode, short press one of the preset number buttons (1, 2, 3, 4, or 5)
to directly access the favorite FM stations stored in presets memory
10. How to use the Bluetooth speaker
10.1. Selecting BT mode
10.1.1. short Press the " /MODE" button to power on the device and short
press the " /MODE" button repeatedly to select BT mode.
10.1.2. The device will automatically find and pair the last paired device
(04) "button repeatedly, each short press is
(04) "button to tune a radio station.
within 5 seconds, if this device cannot find any paired devices, it will
automatically enter search mode 5 seconds later. The display shows:
<BT searching: >

10.2. Connecting Bluetooth devices

10.2.1. Now enable the Bluetooth function on your mobile device and
search for new Bluetooth devices. Select the device named "Lenco
PDR-040".
Wait for a few seconds and you will see the connected message your mobile
device. (For some Bluetooth devices, you may need to input "0000" as
pairing password)
- Display shows: < BT connected > and < Time >.
Note: Set the external device's volume to maximum, then use the volume
dial on the Lenco PDR-040 as main volume.
10.3. Music play
When you are playing music,
10.3.1. Rotate the "Rotary button (07)" to adjust the desired
level.
10.3.2. Press the "Rotary button (07)" to pause play.
10.3.3. Press the "Rotary button (07)" again to resume playing.
10.3.4. Press the" (03) " button to go to the previous music track.
10.3.5. Press the" (04) "button to go to the next music track.
10.4. Auto-Re-connect with Paired devices and new Paring
10.4.1. Short press the "
press the " /MODE"button repeatedly to select BT mode.
10.4.2. It will firstly search for the mobile device which has been paired
previously. The Lenco PDR-040 will re-connect the last connected
mobile device as priority if that one is in Bluetooth search mode.
10.4.3. When no previously paired devices are found, the Lenco PDR-040
will switch to pairing mode.
10.4.4. Now you can process for new mobile device pair. (refer to10. 2)
10.5. Disconnect a paired device (to enable pairing a new device)
10.5.1. Long press the "Rotary button (07)"button to disconnect the
Bluetooth connection directly. The Lenco PDR-040 will switch to
Bluetooth pairing mode.
- Display shows: <Bluetooth Searching>.
10.5.2. Now you can pair the Lenco PDR-040 with another external BT
device.
Note: In Bluetooth mode, this device will automatically go into standby
mode 15 minutes later if no external Bluetooth device is connected or no
operation activity.
11. Troubleshooting
If a fault occurs, first check whether you can resolve the problem yourself.
You might find this overview useful.
11
/MODE" button to power on the device, short
volume