Descargar Imprimir esta página

Atlantic CM737 Guia Del Usuario página 13

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
SETTING-UP THE THERMOSTAT
This section shows you how to setup and run the thermostat in 2 simple steps:
STEP 1: Setting the Day and Time
To set the Day and Time:
a. Press the DAY button once and the 'day indicator' will begin to flash.
b. Press the DAY button until the correct day is reached (Day 1 =
Monday). Press the green
d. Press either of the
flashes the time digits (when the unit is powered for the first time the display shows 12:00).
e. Use the
or
buttons to set the correct time then press the green
confirm. Each press of the buttons will change the time by one minute and holding
them down will change the time slowly at first and get progressively quicker.
Note: If this mode is entered accidentally then press the AUTO, MAN or OFF buttons to exit.
STEP 2: Running the Built-in Heating Program
The thermostat is now ready for operation. Press the AUTO button and the built-
in heating program will start running. Note: The built-in heating program has been
designed to provide normal comfort requirements, but if you want to customise
the settings please see the next section 'Programming the Thermostat'.
PROGRAMMING THE THERMOSTAT
The Built-in Heating Program
The built-in heating program has 4 temperature level changes per day that can be set
between 3.00am and 2.50am the following day - allowing you to maintain the evening
temperature after midnight. Each temperature level can be set between 5°C and 35°C,
and adjusted in 0.5°C increments. The factory default program for heating is as follows.
Monday to Friday
(DAY 1 to 5)
Saturday & Sunday
(DAY 6 & 7)
Reviewing the Heating Program
To review or edit the heating program use the PROGRAM
between the 4 individual programming periods for that day. Use the DAY button to step through
each day of the week, so the complete 7 day heating program can be reviewed or edited.
button to confirm.
or
buttons once to enter time setting mode. The LCD screen
Period
1
Time
6:30
21°C
Temperature
Period
1
8:00
Time
21°C
Temperature
2
3
4
8:00
12:00
22:30
18°C
21°C
16°C
2
3
4
10:00
12:00
23:00
21°C
21°C
16°C
or
buttons to navigate
EN
button to
13

Publicidad

loading