Assembly Or Instructions - PERMASTEEL PG-40612SOLE Manual Del Usuario

ASSEMBLY INSTRUCTIONS
1. Turn both D39&D43 bottom shelves upside
down. Align and connect them with (5) M6×13
Screws and M6 Nuts as shown. Tighten securely.
Hardware Used
JJ
M6 x 13 mm Screw
M6 Nut
DD
2. Insert the two D44&D40 bottom shelf support
bars through the square holes at middle of bottom
shelf as shown.
Hardware Used
NONE.
3. Align the screw holes on bars with the holes on
bottom shelf. Once in position, push down hard
on the bars to snap them all the way down.
Turn shelf right side up, and use (12) M6x40
screws and M6 flat washers to connect bars to
shelf.
Hardware Used
GG
M6 x 40 mm Screw
HH
M6 Flat Washer
1
D39
x 5
x 5
2
D44
3
GG
x 12
x 12
15
D43
JJ
DD
D40
HH