Divisions; Testing & Servicing - Mountz TITAN 100i Manual De Usuario

DIVISIONS

TORQUE WRENCH
# !
TITAN
100i 1/4"
250i 3/8"
75F 3/8"
150F 1/2"
300F 1/2"
600F 3/4" 120-600 lbf
TESTING & SERVICING
The manufacturer guar-
antees a torque wrench
accuracy of +/- 4% to the
scale value in question at a
stress cycle of max. 5000.
It is therefore necessary
that you test your torque
wrench at least every 5000
stress cycles on a traceable
calibrated testing device.
For the testing of your
tool we recommend
torque analyzer
testing equipment.
For information
contact Mountz Inc.
or simply call our
Service-Hotline.
Your torque wrench has
to be calibrated at least
once a year. Re-adjust-
ments should only be
carried out either by autho-
rised personnel, accredited
calibration labs or the
manufacturer.
20-100 lbf in
•
50-250 lbf in
•
10-75 lbf ft
•
30-150 lbf ft
•
60-300 lbf ft
•
ft
•
TITAN
Graduation
5 lbf in
•
10 lbf in
•
2.5 lbf ft
•
5 lbf ft
•
10 lbf ft
•
10 lbf ft
•
For calibration, re-
adjustment or repairs
we recommend the
service department
of Mountz Inc., the
in-house calibration
lab.
Before a longer period
of non-utilisation the
compression spring of
your torque wrench needs
to be released. Turn the
torque back to the small-
est value on the scale.
Protect your torque
wrench from dust, dirt and
sand by placing it back in
the box after use and store
it in a dry, clean place.
Clean your torque
wrench on the outside
with a dry, clean cloth.
Do not use cleaning spirit
or any other chemical
solvents as these interfere
with the permanent lubri-
cation of the mechanism.
9
Graduation - collar
no collar
1 lbf in
•
0.25 lbf ft
•
0.5 lbf ft
•
1 lbf ft
•
1 lbf ft
•