Publicidad
Idiomas disponibles
Idiomas disponibles
E N G L I S H
E N G L I S H
E N G L I S H
E N G L I S H
DESCRIPTION OF THE PRODUCT AND APPLICATION FIELD.
These filters are the most reliable nowadays in the market for the cleaning and the maintenance of your domestic swimming pool. They find their
application from children to professional's aboveground pools.
Each model is provided of a multifunctional valve that allows the application of the product in many different ways.
In particular the filters do not need special maintenance operations because working directly on the valve they allow their deep cleaning with no need
of long and exhausting operations.
Follow carefully what is reported next so that you will use the filter respecting the most common safety rules and remember that it is necessary to have
a proper pool pump to be able to use the filter.
Always remember that each operation must be done with plug disconnected and that the pump must never work without water.
APPLICATION LIMITS
Maximum water temperature : 35° C.
Maximum pump's flow rate: 20000l/h.
Sand type: 0.4 – 0.8mm.
USE AND REGULATION.
To be applied the filters must be connected to a pool pump as the type indicated at the Fig. 1.
Furthermore it is possible to couple the pool pump to a skimmer (superficial aspirator) as shown at the Fig.2 and Fig.11.
Positioning.
Before assembling the filter it is better to decide its final position because when it will be refilled with sand it will be hard to move. The
distance of the filter from the swimming pool border should be at least of 3.5mm.
The parts that build your filter.
As you can see from the Fig. 3 your filter is formed of many components.
1.
Multifunctional Valve.
2.
Soft O-Ring for the sealing between the multifunctional valve and the tank.
3.
Closing flange.
4.
Funnel.
5.
Drain Tap.
6.
Tank.
7.
Tube with body diffuser.
8.
Fingers.
Drain Tap assembling.
Before mounting the filter assemble the special water drain tap. Fig.4.
The components that form the drain tap are:
9.
Tap Body.
10. Tap's O-Ring couple. One is to be applied internally and the other one externally.
11. Closing Ring.
12. Lid's O-Ring.
13. Lid.
Filter assembling.
Once the drain tap is mounted on the tank paying attention that all the O-Ring are well applied you can proceed with the Filter assembling.
Insert diagonally the tube with the diffuser body inside the filter as shown in the Fig.5 and subsequently mount the plugs on the diffuser body.
Place the diffuser complete with the tube underneath the tank. Refill the tank with water until the first line you can see on the tank Fig. 6.
This procedure give stability to the diffuser.
Place the special funnel on the tank's mouth, paying attention to cover properly the tube, and start to pour the quartz sand (not supplied) into
the tank Fig. 7.
Once you refilled the tank with sand until the higher line (around 2/3 of the tank's height) remove the funnel.
Take now the special valve supplied and insert it applying it under the soft O-Ring Fig. 8.
Clean really carefully the tank's neck, place the valve taking care that the tube enter in the central hole. Fig. 9.
Now fix the valve to the tank through the supplied flange Fig. 10. Work with a screwdriver to tight the screws.
Take off the multifunction white valve cap,apply some supplied teflon around the manometer thread and then screw the manometer with a
key using no strength on the plastic box (Fig.12). Now your sand filter is at your disposal.
Connection to the skimmer and to the pump (Fig. 11).
Important: apply some supplied teflon around the hosetails to guarantee a safe sealing.
1.
Pressure Tube: join the higher filter pump connection to the "PUMP" connection, arranged on the 4 or 6 ways valve.
2.
Skimmer Tube: join the Skimmer connection to the frontal connection of the filter pump.
3.
Return-Tube: join the connection on the 4 or 6 ways valve marked with "RETURN" to the entrance mouth connection of the
swimming pool. Tight with special hose clamps the tubes on the connections.
4.
Backwash-Tube: to be used when we apply the backwash function to drain the dirty water in a discharge area. For the connection
use proper rubber tubes and proper hose clamps.
Refilling the swimming pool.
If you have already connected everything properly you can now start to refill the swimming pool. The water level must reach at least the
middle of the Skimmer's suction mouth.
Minimum water temperature: 4° C.
Maximum pump's prevalence: 20m.
Publicidad
