Install Burner Assemblies - Electrolux ECFD3668AS Instrucciones De Instalación

30" & 36" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS
9

Install Burner Assemblies

To prevent flare-ups use the cooktop with all burner caps properly installed.
9.1
Standard Sealed Burners
Place a burner cap on each burner head, matching the cap size to the head size.
The cap for each burner has an inner locating ring which centers the cap correctly on the burner head. Make sure
each burner cap is properly aligned and level. Burners may not light or burn evenly if the burner caps are not correctly
place on the head.
Figure 27: Burner cap assembly
9.2
Specialty Burners
Install the specialty burners as shown in Figure 29.
When the burner ring is properly seated, it will click into place. When the burner cap is properly set in place it should not
move out of the recessed area of the burner head.
To ignite properly, burner ring alignment tab must be fitted into the burner base alignment tab slot. Make sure burner cap
and ring are secure before attempting to light the burner.
Burner ring
alignment tab
Figure 29: Specialty burner assembly
Burner cap
Locating ring
Burner head
Burner alignment
tab slot
Correct cap placement
Figure 28: Burner cap placement
16
Incorrect cap placement
Burner cap
Burner ring
Burner base
Simmer head