Wall Mounting The Camera - Lorex Baby LITTLE LINK BB2411 Guia Del Usuario

ds,

Wall Mounting the Camera

Before permanently mounting the camera:
• Determine where you will get the best view of your
baby.
• Ensure the power cable is long enough to power the
camera.
Make sure all power cables are at
least 3ft / 1m away from the crib and
out of reach of your child.
Use the included cable clips to help
keep power cords away from your
child.
Using a coin, turn the mounting plate on the
1
camera base counter-clockwise to remove it
from the base.
Hold the mounting plate against the wall
2
where you would like to mount the camera.
Use a pencil to mark holes for the mounting
3
screws.
4
Drill holes where marked using a drill.
5
Tap the included anchors into the holes.
Attach the mounting plate to the wall using the
6
included mounting screws.
Attach the camera base to the mounting plate.
7
Make sure the locking mechanism on the plate
lines up with the indent in the camera base.
Twist the camera base clockwise to secure it to
8
the mounting plate.
The package includes an extra mounting
plate to be attached to the camera base
when the camera is used on a flat surface.
Cable clips
7