Descargar
Compartir
Imprimir esta página
Sauder 408920 Manual Del Usuario
  1. Manuales
  2. Marcas
  3. Sauder Manuales
  4. Muebles de Interior
  5. 408920
  6. Manual del usuario

Sauder 408920 Manual Del Usuario

Escritorio ejecutivo
Ocultar thumbs

Publicidad

Enlaces rápidos

Descargar este manual
sauder.com
Executive Desk
Shoal Creek Collection | Model 408920
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
Business or pleasure.
Works both ways.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-34
Français pg 35-39
Español pg 40-44
Lot # 392369
06/20/16
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987

Publicidad

loading

Manuales relacionados para Sauder 408920

Resumen de contenidos para Sauder 408920

  • Página 1 Shoal Creek Collection | Model 408920 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Prefer the phone? Call 1-800-523-3987.
  • Página 2 LEFT FRONT/RIGHT REAR LEG (2) LARGE DRAWER BOX FRONT (2) DRAWER BACK (2) KEYBOARD FRONT (1) MOLDING (1) LARGE DRAWER BACK (2) KEYBOARD BACK (1) END MOLDING (2) D132 RIGHT DRAWER SIDE (2) KEYBOARD SIDE (2) Page 2 408920 www.sauder.com/services...

  • Página 3: Part Identifi Cation

    Part Identifi cation D132 D707 D138 D707 www.sauder.com/services 408920 Page 3...
  • Página 4 LONG SUPPORT HIDDEN CAM - 40 FILE ROD - 4 FILE GLIDE - 4 CAM DOWEL - 28 ROD - 1 ® TWIST-LOCK ANCHOR PLATE - 2 CAM SCREW - 12 HINGE - 2 FASTENER - 5 Page 4 408920 www.sauder.com/services...
  • Página 5 31S BLACK 7/8" FLAT HEAD SCREW - 4 32S BLACK 9/16" FLAT HEAD SCREW - 9 SILVER 1-1/4" MACHINE SCREW - 12 GOLD 1" MACHINE SCREW - 2 54S SILVER 9/16" LARGE HEAD SCREW - 10 www.sauder.com/services 408920 Page 5...
  • Página 6 fl oor. Scan this QR code or go to this address: http://qr.sauder.com/?ID=1534 To begin assembly, push a SAUDER TWIST-LOCK® å to watch a video on how to assemble your unit. FASTENER (7F) into the large holes in the MODESTY PANEL (G).
  • Página 7 CAM DOWELS into these edges. Arrow Arrow Insert the metal end of the CAM DOWEL into the HIDDEN CAM. Hole The arrow in the HIDDEN CAM must point toward the hole in the edge of the board. www.sauder.com/services 408920 Page 7...
  • Página 8 Step 3 Turn twelve CAM SCREWS (8F) into the LEGS (H and I). å Just think. The sooner you do this, the sooner you do something else. (12 used) Page 8 408920 www.sauder.com/services...
  • Página 9 Fasten one of each LEG (H and I) to the ENDS (A and B). å Tighten six HIDDEN CAMS. These surfaces should be even. Edge with Curved edge HIDDEN CAMS These surfaces should be even. Curved edge www.sauder.com/services 408920 Page 9...
  • Página 10 Shoulder Apply pressure with your hands as you guide the MOLDINGS over These edges the SCREWS and onto the ENDS. BLACK 9/16" FLAT HEAD SCREW should be even. (6 used in this step) Page 10 408920 www.sauder.com/services...
  • Página 11 Step 6 Fasten the remaining LEGS (H and I) to the ENDS (A å and B). Tighten six HIDDEN CAMS. Edge with HIDDEN CAMS Curved edge Curved edge www.sauder.com/services 408920 Page 11...
  • Página 12 These edges should be even. BLACK 9/16" FLAT HEAD SCREW (3 used in this step) Shoulder Apply pressure with your hands as you guide the MOLDINGS over the SCREWS and onto the ENDS. Page 12 408920 www.sauder.com/services...
  • Página 13 Step 8 Turn the MODESTY PANEL (G) over and fasten the å MOLDING (Y) to the MODESTY PANEL. Use four BLACK 7/8" FLAT HEAD SCREWS (31S). BLACK 7/8" FLAT HEAD SCREW (4 used in this step) www.sauder.com/services 408920 Page 13...
  • Página 14 NOTE: The EXTENSION SLIDES will be used later for the DRAWERS. å Push the black lever in and pull the SLIDE from the RAIL. Open end Open end Open end GOLD 5/16" FLAT HEAD SCREW (8 used in this step) Open end Page 14 408920 www.sauder.com/services...
  • Página 15 NOTE: The EXTENSION SLIDES will be used later for the DRAWERS. å Push the black lever in and pull the SLIDE from the RAIL. Open end GOLD 5/16" FLAT HEAD SCREW (8 used in this step) Open end Open end Open end www.sauder.com/services 408920 Page 15...
  • Página 16 NOTE: The CABINET RAILS are marked "CABINET å RIGHT" and "CABINET LEFT" for easy identifi cation. Roller end GOLD 5/16" FLAT HEAD SCREW (4 used in this step) Finished edge Roller end Finished edge Page 16 408920 www.sauder.com/services...
  • Página 17 Tighten Risk of damage or Arrow injury. HIDDEN CAMS must be completely Arrow Maximum tightened. HIDDEN 210 degrees CAMS that are not completely tightened may loosen, and parts may separate. To Minimum completely tighten: 190 degrees www.sauder.com/services 408920 Page 17...
  • Página 18 Insert the METAL PINS (1R) in one end of the BOTTOMS (M60) å 210 degrees into the holes in the UPRIGHTS (C3 and D3). Fasten the BOTTOMS (M60) to the UPRIGHTS (C3 and D3). å Minimum Tighten two HIDDEN CAMS. 190 degrees Finished edge Finished edge Page 18 408920 www.sauder.com/services...
  • Página 19 Fasten the ENDS (A and B) to the BOTTOMS (M60) and å MODESTY PANEL (G). Tighten eight HIDDEN CAMS. Maximum Arrow 210 degrees NOTE: Be sure the METAL PINS in the BOTTOMS insert å into the holes in the ENDS. Minimum 190 degrees www.sauder.com/services 408920 Page 19...
  • Página 20 Step 15 Fasten the TOP (EE3) to the MODESTY PANEL (G). å ® How to use the SAUDER TWIST-LOCK FASTENER Tighten fi ve TWIST-LOCK® FASTENERS. 1. Insert the dowel end of the FASTENER into the hole of the adjoining part.
  • Página 21 Step 16 Fasten two ANCHOR PLATES (66G) to the TOP (EE3). å Use eight SILVER 9/16" LARGE HEAD SCREWS (54S). SILVER 9/16" LARGE HEAD SCREW (8 used in this step) www.sauder.com/services 408920 Page 21...
  • Página 22 Slide the TURNBUCKLE (9A) over the other end of the SHORT å SUPPORT ROD (23A). NOTE: The head of the SHORT SUPPORT ROD should be å inside the rectangle opening in the center of the TURNBUCKLE. Page 22 408920 www.sauder.com/services...
  • Página 23 SUPPORT RODS and the TOP. Now, insert your screwdriver through the large hole in the middle of the TURNBUCKLE and turn the TURNBUCKLE another half turn. NOTE: Tighten the TURNBUCKLE if the TOP ever begins to sag. å www.sauder.com/services 408920 Page 23...
  • Página 24 BLACK 1-7/8" FLAT HEAD SCREW (6 used in this step) Long fi nished edge SILVER 5/8" FLAT HEAD SCREW (4 used in this step) SILVER 9/16" LARGE HEAD SCREW (2 used in this step) Page 24 408920 www.sauder.com/services...
  • Página 25 Fasten the KNOBS (24K) to the KEYBOARD FRONT (J). å Use two GOLD 1" MACHINE SCREWS (50S). Roller end GOLD 1" MACHINE SCREW (2 used in this step) Roller end BROWN 1" FLAT HEAD SCREW (4 used for the DRAWER SLIDES) www.sauder.com/services 408920 Page 25...
  • Página 26 Fasten the LARGE DRAWER BACK (D78) to the LARGE DRAWER SIDES (D28 and D29). Use four BLACK 1-9/16" FLAT å HEAD SCREWS (30S). NOTE: Be sure the DRAWER BOTTOM (D707) inserts into the groove of the LARGE DRAWER BACK (D78). å Repeat this step for the other large drawer. å Page 26 408920 www.sauder.com/services...
  • Página 27 Fasten the DRAWER BACK (D77) to the DRAWER SIDES (D132 and D138). Use four BLACK 1-9/16" å FLAT HEAD SCREWS (30S). NOTE: Be sure the DRAWER BOTTOM (D707) inserts into the groove of the DRAWER BACK (D77). å Repeat this step for the other drawer. å www.sauder.com/services 408920 Page 27...
  • Página 28 Next, fasten a PULL (7K) to the LARGE DRAWER FRONT (T). å Use two SILVER 1-1/4" MACHINE SCREWS (35S) through on sauder.com. the LARGE DRAWER BOX FRONT (U), through the DRAWER FRONT, and into the PULL. Fasten two PULLS (7K) to the DRAWER FRONT (N2). Use å...
  • Página 29 Next, fasten a PULL (7K) to the LARGE DRAWER FRONT (T). å Use two SILVER 1-1/4" MACHINE SCREWS (35S) through on sauder.com. the LARGE DRAWER BOX FRONT (U), through the DRAWER FRONT, and into the PULL. Fasten two PULLS (7K) to the DRAWER FRONT (N2). Use å...
  • Página 30 å Open end Screw head - turn CAM to line up holes in the SLIDES with holes in DRAWER SIDES Open end (4 screws per drawer) GOLD 5/16" FLAT HEAD SCREW (8 used in this step) Page 30 408920 www.sauder.com/services...
  • Página 31 Open end Screw head - turn CAM to line up holes in the SLIDES with holes in DRAWER SIDES D138 Open end D132 (4 screws per drawer) GOLD 5/16" FLAT HEAD SCREW (8 used in this step) www.sauder.com/services 408920 Page 31...
  • Página 32 FILE RODS (8B), then press this FILE GLIDE over the LARGE RIGHT DRAWER SIDE (D28). Repeat this step for the other large drawer. å Insert the FILE RODS into the holes in the FILE GLIDES depending on your fi le sizes. Page 32 408920 www.sauder.com/services...
  • Página 33 Insert the GROMMET (10P) into the large hole in the TOP (EE3). Then, insert a GROMMET CAP (1P) onto the GROMMET. å Click the inner cartridge into place against the black tab. Front Extension Rail Inner cartridge Black tab 15 lbs. 75 lbs. 15 lbs. 30 lbs. 15 lbs. Left Drawers 30 lbs. Right Drawers www.sauder.com/services 408920 Page 33...
  • Página 34 #4. The higher the screw in the oblong hole, the higher your drawer front will be. The lower the screw, the lower the drawer front. Page 34 408920 www.sauder.com/services...

  • Página 35: Liste De Pièces

    Modèle 408920 Bureau Ministre Utilisez les instructions d’ a ssemblage en français avec les NOUS SOMMES LA POUR VOUS AIDER! schémas étape par étape du manuel d’instruction en anglais. Nous faisons de notre mieux pour nous assurer que votre meuble Chaque étape en français correspond à...
  • Página 36 Pour commencer l'assemblage, enfoncer une FIXATION TWIST-LOCK® Maintenant, enfi ler les MOULURES D'EXTRÉMITÉ (Z) sur SAUDER (7F) dans les gros trous dans le VOILE DE FOND (G). les EXTRÉMITÉS (A et B). Pour cela, aligner les rainures des MOULURES sur les têtes des VIS dans les EXTRÉMITÉS. Avec les mains, appliquer une certaine pression sur les MOULURES pour ÉTAPE 2...
  • Página 37 VIS dans le trou indiqué dans le schéma agrandi. Ensuite, enfi ler la cartouche interne de la GLISSIÈRE D'EXTENSION vers l'intérieur pour trouver l'autre trou qui est aligné sur le trou dans l’EXTRÉMITÉ et le MONTANT. Faire tourner une VIS dans ce trou. www.sauder.com/services 408920 Page 37...
  • Página 38 TABLETTE DE CLAVIER (K) et à la TABLETTE DE CLAVIER (M). Utiliser quatre VIS TÊTE PLATE 48 mm NOIRES (2S). Utilisation de la FIXATION TWIST-LOCK® SAUDER Fixer les CHARNIÈRES (12H) au DEVANT DE TABLETTE DE CLAVIER (J). 1. Insérer l'extrémité fi letée de la FIXATION dans le trou de la Utiliser quatre VIS TÊTE PLATE 16 mm ARGENT (23S).
  • Página 39 TIROIR (D132 et D138) en utilisant les trous nº 1 et nº 3. Utiliser quatre VIS TÊTE PLATE 8 mm DORÉES (FFF). REMARQUE : La tête de vis dans l'EXCENTRIQUE doit être visible à travers le trou fendu dans la COULISSE. Répéter cette étape pour l'autre tiroir. www.sauder.com/services 408920 Page 39...

  • Página 40: Escritorio Ejecutivo

    Modelo 408920 Escritorio Ejecutivo Use estas instrucciones de ensamblaje en español junto con las ESTAMOS AQUI PARA AYUDAR! fi guras paso-a-paso provistas en el folleto inglés. Cada paso Tratamos de asegurar que su mueble llega en condición excelente. en español corresponde al mismo paso en inglés. Se destacan Nuestros representantes de Servicio al Cliente son amables y las fi...
  • Página 41 PASO 7 Para comenzar el ensamblaje, empuje un SUJETADOR TWIST-LOCK® SAUDER (7F) dentro de los agujeros grandes del VELO DE FONDO (G). Atornille tres TORNILLOS NEGROS DE CABEZA PERDIDA de 14 mm (32S) dentro del VELO DE FONDO (G) hasta que el resalto PASO 2 de los TORNILLOS repose sobre la superfi...
  • Página 42 PARALES (C3 y D3). Apriete doce EXCÉNTRICOS ESCONDIDOS. EXTREMOS (A y B) y a los PARALES (C3 y D3). Utilice ocho Cómo utilizar el SUJETADOR TWIST-LOCK® SAUDER TORNILLOS DORADOS DE CABEZA PERDIDA de 8 mm (3S). 1. Inserte el extremo con cabilla del SUJETADOR dentro del NOTA: Para cada RIEL DE EXTENSIÓN, atornille un TORNILLO...
  • Página 43 TORNILLOS PLATEADOS PARA METAL de 32 mm (35S) a través del FRENTE DE CAJÓN (O), a través de la CARA DE CAJÓN y dentro de los TIRADORES. NOTA: Asegúrese de utilizar la serie de agujeros de la derecha. www.sauder.com/services 408920 Page 43...
  • Página 44 CAJÓN GRANDE (D28). instrucciones en cuanto a importante información de seguridad. Repita este paso para el otro cajón grand Esto completa el ensamblaje. Limpie con su pulimento para muebles preferido o un paño húmedo. Seque con un paño. Page 44 408920 www.sauder.com/services...
  • Página 45 à Les téléviseurs peuvent être particulièrement un téléviseur. cet eff et. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. www.sauder.com/services 408920 Page 45...
  • Página 46 ADVERTENCIA Por favor use el mobiliario correcta y seguramente. El mal uso puede causar riesgos de seguridad o daño a las unidades o artículos domésticos. Cuidadosamente lea la tabla a continuación. Esté alerto de: Puede ocurrir: Evitar el problema: • Estantes y cajones sobrecargados. •...

  • Página 47: Garantie Limitée De 5 Ans

    à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
  • Página 48 Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.