Publicidad
Step 21
1
D28
U
Groove
Insert the LARGE DRAWER SIDES (D28 and D29)
å
at an angle into the slot at each end of the LARGE
DRAWER BOX FRONT (U).
3
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Fasten the LARGE DRAWER BACK (D78) to the LARGE DRAWER SIDES (D28 and D29). Use four BLACK 1-9/16" FLAT
å
HEAD SCREWS (30S).
NOTE: Be sure the DRAWER BOTTOM (D707) inserts into the groove of the LARGE DRAWER BACK (D78).
å
Repeat this step for the other large drawer.
å
Page 26
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D29
D78
D28
D707
VIEW THE T-LOCK BOX VIDEO
2
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D707) into the grooves in
å
the LARGE DRAWER SIDES (D28 and D29) and LARGE
DRAWER BOX FRONT (U).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D29
408920
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
U n
fi n
s u
i s h
r f a
e d
c e
D707
D28
D29
U
30S
(8 used in this step)
www.sauder.com/services
Publicidad
