Replacing The Fuse - Chauvet Professional NEXUS 4x1 Guía De Referencia Rápida

EN
AC Power
Power Linking
AC Plug
Replacing the
Fuse
DMX Linking
DMX Connection
Art-Net™
Connection
Kling-Net
Connection
Master/Slave
Connection
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 15 Nexus™ 4x1 products at 120 VAC or
28 at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
Connection
AC Live
AC Neutral
AC Ground
1.
Disconnect this product from power.
2.
Using a flat-head screwdriver, unscrew the fuse holder cap from
the housing.
3.
Remove blown fuse and replace with a good fuse of the same type
and rating.
4.
Screw the fuse holder cap back in place and reconnect power.
The Nexus™ 4x1 will work with a DMX controller using a regular DMX
serial connection. A DMX Primer is available from www.chauvetpro.com.
The Nexus™ 4x1 uses a regular DMX data for its DMX personalities:
3, 5, 9, 12, and 17. See the User Manual to connect and configure for DMX
operation.
Art-Net™ is an Ethernet protocol that uses TCP/IP to transfer large
amounts of DMX512 data over a large network. Art-Net™ uses the
Neutrik® etherCON® RJ 45 connection. An Art-Net™ Primer is available
from www.chauvetpro.com. Art-Net™ is Designed by and Copyright
Artistic Licence Holdings Ltd.
Kling-Net is a network protocol to allow auto configuration of display
devices over ethernet. Kling-Net uses the Neutrik® etherCON® RJ 45
connection. Refer to the ArKaos MediaMaster™ software manual for
detailed instructions on installing and programming this product using this
protocol.
The Nexus™ 4x1 uses the DMX data connection for its Master/Slave
mode. See the User Manual to connect and configure for Master/Slave
operation.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
3
Nexus™ 4x1 QRG
Screw Color
Brown Yellow/Brass
Blue
Green
Silver