Replacing The Fuse - Chauvet Professional Rogue R2 Spot Guía De Referencia Rápida

Rogue™ R2 Spot QRG
AC Power
Power Linking
AC Plug

Replacing The Fuse

DMX Linking
DMX Connection
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
You can link up to 5 Rogue™ R2 Spot products at 120 V, 8 products at 208 V, or
9 products at 230 V. Never exceed this number. Power linking cords can be
purchased separately.
Connection
AC Live
AC Neutral
AC Ground
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
The Rogue™ R2 Spot will work with a DMX controller using a 3- or 5-pin DMX
data connection. A DMX Primer is available from
The Rogue™ R2 Spot uses a 3- or 5-pin DMX data connection for its DMX
personalities: 18CH and 21CH. See the User Manual for information about
connecting and configuring the product for DMX operation.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
3
Screw Color
Brown Yellow/Brass
Blue Silver
Green
www.chauvetprofessional.com
EN