User Guide (English)
Introduction
MPC Fly merges unmatched Akai Professional technology with the power of your iPad,
embodying legendary capabilities that have made the MPC an industry standard like real MPC
pads, MPC Note Repeat and MPC Swing. Its multifunctional, double-hinged design gives you
the flexibility to produce tracks anywhere, while also acting as a protective case between
sessions and giving you total access to your iPad for normal uses.
Box Contents
•
MPC Fly
•
Power Adapter
•
User Guide
•
Safety & Warranty Manual
Quick Setup / Connection Diagram
Note: MPC Fly is compatible with
the following iOS devices (not
included):
• iPad (3rd generation)
• iPad 2
1.
Purchase and install iMPC
from the App Store.
2.
Place MPC Fly on a flat, stable
surface. Insert your iPad – with
its Home Button on the right –
into MPC Fly's case.
3.
Optional: Connect MPC Fly to
a power source using the
included power adapter. This
connection
will
charge the batteries of both
MPC Fly and your iPad.
4.
Optional: Connect 1/8" stereo headphones to the headphone jack of your iPad.
5.
Gently connect MPC Fly's attached dock connector cable to the dock connector port of
your iPad, and power on MPC Fly.
6.
Open iMPC and start making beats! Remember to power off MPC Fly and lock your iPad
when not in use.
Note: If iMPC does not respond to MPC Fly, double-click the Home Button of your iPad,
touch and hold your finger over the app icon until it shakes, tap the minus symbol, and
click the Home Button again. Make sure your iPad is properly connected to the dock
connector. Then, reopen iMPC.
Headphones and iPad not included.
iPad and App Store are trademarks of Apple Inc., registered in the US and other countries.
power
and
3